Mill And Miller'S House

The building is a former mill and miller's house, dating from the mid to late 18th century. It is constructed of random limestone rubble, with the house featuring a pebble-dashed southeast front and a stone slate roof, along with rubble and brick stacks. The layout of the house is 'L'-shaped, with the mill located at the south gable end and a single-storey extension at right angles at the rear. There is also a single-storey extension with a corrugated iron roof on the mill, which is not considered of special interest.

The house has two storeys, while the mill has three storeys and an attic. The southeast front of the house has four windows, each with 12-pane sashes and plain architraves on both floors, one of which is set within the blocking of a former doorway. To the left, there is a part-glazed door with glazing bars and a plain dressed stone architrave, topped by a flat leaded canopy. The mill's south front features four windows, including a combination of 3-light and single-light casements on the ground floor, with gearing projecting from two of these windows. The first floor has 2 and 3-light casements (one of which is blind) and a pitching door, while the upper floor has four blind windows painted to imitate 2-light casements with glazing bars. A single 3-light hipped roof dormer is also present. There are plank doors located at the lower right and lower left, and all windows and doorways are adorned with dressed stone lintels and keystones.

On the rear elevation, there is a segmental-headed arch marking the point where the head race ran under the mill. The fenestration at the rear of both the house and the mill includes 2 and 3-light metal casements, a 12-pane sash, and segmental-headed casements. A 19th-century plank door with a single glazed panel at the top leads into the miller's house. The building features axial, gable-end, and corner stacks.

Inside the house, there are shutters with sunken panels, a dado, a basket-headed recess, and 6-panel doors with moulded architraves, although the staircase was not inspected. The mill machinery was relocated to Arlington Mill in Bibury in 1960.