Hollins is a Grade II listed building in the Shropshire local planning authority area, England. First listed on 29 February 2000. A Late C16 and C17 House.
Hollins
- WRENN ID
- fossil-chamber-owl
- Grade
- II
- Local Planning Authority
- Shropshire
- Country
- England
- Date first listed
- 29 February 2000
- Type
- House
- Source
- Historic England listing
Description
House, formerly reputed to have been a dower house to Whitton Court at Whitton, later subdivided into three houses, now a single house. Built in the late 16th and 17th centuries with 19th-century extensions.
The building is constructed with a painted timber-framed first floor with brick and render infill panels, rubble stone ground floor, and a plain-tiled roof. The roof features an off-centre 17th-century brick ridge chimney with spurred shafts and a 19th-century integral brick verge stack. The plan is H-shaped, with the main framed range flanked by north and south cross wings, each extended.
The building is 2-storeys with an attic. The west entrance front has the north cross wing gable to the left, with a stone rubble ground floor and timber framing above. The square framing comprises jowled posts, braces, a cambered tie beam with weathering board, twin struts, and a collar with twin raking struts. A single trenched-purlin roof is evident. A 2-light leaded casement sits at the first floor. A 20th-century oak-boarded front door with leaded side lights provides the entrance. To the extreme left is a stone single-storey extension with gabled roof containing two 19th-century 2-light casements.
The central 2-bay main range has first-floor timber framing of girding beam, posts, middle rails and studs. The left bay has a 2-light oak casement with leaded lights at the first floor above a metal 3-light casement at ground floor. The right bay shows the position of a former framed window above a plain boarded door with brick segmental-arched lintel.
To the right is the framed gable of the south cross wing. Its first-floor framing consists of rectangular panels with girding beam, jowled posts, studs and middle rails. The jettied tie beam has triple ovolo-chamfer with run-out stops set on ornamental carved brackets. Vertical struts with middle rails and a collar with twin raking struts complete the frame. The struts frame a bricked-up attic window with leaded lights still evident. A 19th-century 2-light casement has been inserted in the original framed window position at the first floor, and a 20th-century metal casement to the left. A metal 3-light casement appears at ground floor.
The right-hand return of the south cross wing shows three framed bays of rectangular panels at first floor above a stone rubble ground floor. The framing consists of a girding beam, posts, middle rails and studs, with two original framed window positions. Two 2-light casements, one in an original position, are present. At ground floor, two 2-light casements flank a plain boarded door with brick segmental arch. The gable-end return was rebuilt in 19th-century brick and is masked by a single-storey stone rubble extension.
The rear of the south cross wing has a single bay of timber framing on a ground-floor stone wall. A 19th-century casement window appears at each floor. A stone rubble extension extends to the left.
The rear of the main range has two framed bays on a stone ground-floor wall, with two original framed window positions. The right-hand position contains a 2-light metal casement. A plain boarded ground-floor door with brick segmental arch stands to the left. The gable-end of the north cross wing to the right has been rebuilt with painted brick, retaining only the jowled posts. A 2-light casement with brick segmental arch appears at the first floor and two at ground floor. The return end of the north cross wing is masked by a 19th-century stone extension.
Internally, the first-floor timbers are reputed to have simple red painted decoration in the form of lines, scrolls, and squares on doors representing panels.
Detailed Attributes
Matched applications, energy data and sale records are assembled automatically and may contain errors. Flag incorrect data.